Third Gen Common faults thread

[buzzzfuzz]

Reposting in right thread?

My windscreen washer hoses/tubes whatever they are called need replacing. I get f' all water pressure coming out. DIY fixes haven't done much help. It could actually be the nozzle attachment (under the bonnet) that connects the tubes. They don't hold in place properly. Any ideas on parts or can this be a yum cha ebay solution?

[Skapper]

Reposting in right thread?

My windscreen washer hoses/tubes whatever they are called need replacing. I get f' all water pressure coming out. DIY fixes haven't done much help. It could actually be the nozzle attachment (under the bonnet) that connects the tubes. They don't hold in place properly. Any ideas on parts or can this be a yum cha ebay solution?

Might not be the hoses. Between the washer tank and nozzles there are some one-way valves, they're relatively easy to spot. These could get blocked eventually, and while I've never had the issue you're describing, I can see how these one-way valves may be contributing to the issue you describe.

[buzzzfuzz]

Might not be the hoses. Between the washer tank and nozzles there are some one-way valves, they're relatively easy to spot. These could get blocked eventually, and while I've never had the issue you're describing, I can see how these one-way valves may be contributing to the issue you describe.

Awesome thanks. I might upload a video with said issue if checking this fails. I think it might be more due to the fact the tubes aren't staying in place into the washer nozzles and tape/super glue help a bit they eventually cease.

[highlander2287]

I had a similar problem a little while ago, the tubes kept coming off. Must have softened or expanded. I just cut a small piece off the end of the hose and then connected the newer end and it was a much tighter fit and they stayed on. Just a thought.